BRAZED PLATE HEAT EXCHANGERS FOR YOUR OUTDOOR WOOD FURNACE BOILER. BUY THESE BRAZED PLATE HEAT EXCHANGERS AND LET YOUR OUTDOOR WOOD FURNACE BOILER START SAVING YOUR MONEY TODAY. THIS BRAZED PLATE HEAT EXCHANGER WILL WORK WITH ANY OUTDOOR WOOD FURNACE BOILER BRAND.TECHNICAL DATA: Type: Brazed Plate Heat Exchanger
Plate Material: ASTM 316L Stainless Steel
Dimensions: 12" long x 4 1/4" wide (see the photo below for reference: a x b sizes respectively)
Outlet sizes: 1" Male IPS (MPT) threaded nipples, ASTM standard
Min. operating temperature: -256 F
Max. operating temperature: 437 F Max. design pressure: 435 psigTHIS PRODUCT IS UL LISTED OTHERS ARE NOT SO BE CAREFUL DON'T FIND OUT THE HARD WAY 110% price guaranty only at Andersons THIS IS A 50 PLATE UL LISTED LARGE STYLE HEAT EXCHANGER. If you find the same item buy it now priced for less and you buy our same item, we will send you a 110% of the difference. Good at time of purchase . To get the refund simply send us the current item # you have found that is less and we will send you the refund. Item may not be an expired listing. NO need to shop, buy here with confidence. APROX SPECS ARE: MAX PRESSURE IS 435,THE MAX TEMP IS 392 DEG . THE LENGTH IS OVER 12 INCHES . THE TREADED NIPPLES ARE 1INCH ID DONT BE FOOLED BY SMALLER UNITS THAT ARE NOT 12 INCHES LONG DON'T SETTLE FOR LESS QUALITY. YOU ARE BUYING A 50 PLATE BRAZED HEAT EXCHANGER MADE FROM 316 STAINLESS STEEL AND IS BRAND NEW. THIS UNIT WILL MAKE YOUR HEAT EXCHANGE MORE EFFICIENT WITH YOU BOILER AND OUTDOOR FURNACE OR INDOOR FURNACE. DO NOT DELAY . To see product CLICK OR CALL 877.339.0061 toll free TY JEFF OTHERS CLAIM MORE HEATING AREA!!! OURS MAY DO MORE THAN LISTED BELOW BUT IF YOU FOLLOW THE GUIDELINE BELOW YOU WILL NEVER BE UNHAPPY!!!!
HOW TO BUY A BRAZED PLATE HEAT EXCHANGER
1. The most important thing is the length and width of the heat exchanger. Ours are 12 inches. This is important as it has the most heat transfer area. It's not how many plates the exchanger has that is important but first as stated above the size!!!!!!
2. The port size is important. Most furnaces use 1 inch tubing so make sure you are not buying 3/4 inch ports as this will decrease water flow to the rest of your system. Ours are 1 inch.
3. Make sure you properly size your heat exchanger. Here is a guide based on 12 inches
A. 10 plates are used for domestic hot water or small infloor heat areas less than 1100 sq ft. will work with the largest of domestic hot water systems and should never need to be larger that this unless you will be using domestic hot water for more that 3 hours straight at one time.
B. 20 plates are used for smaller homes from 1000-2500 sq ft
C. 40 plates are used for larger homes from 2500-4500 sq ft
D. 70 plates are used for areas 5000-7000 sq ft areas.
The above is a guide to help you. If there is any question always buy the next size larger just to make sure. All items above are based again on 12 inch with 1 inch ports
4. Make sure you have a good warranty and make sure that the person you buy from sells only heating products as the others may not be there to service you down the road.
