Pricing / Quotes
> 1 1/4" Sharkbite Fitting 9O DEG Elbow SB0235
SHARKBYTE 90 DEG ELL PUSH ON FITTING
1 1/4" Sharkbite Fitting 9O DEG Elbow SB0235
1 1/4" Sharkbite Fitting Elbow
Put me on the Waiting List
Add to Cart
Add to Gift Registry
You are buying one 1 1/4" SharkBite 2XL 90 Degree Push on Fitting. No tool required for installation. This fitting will save you time as it simply pushes right on!
PLEASE NOTE: If you are using this for pex, you must buy Item number 150977514567 call 920-838-4205 or 262-339-0061 with questions if needed.
Shipping is only free to the lower 48 of the USA if you buy another item that is not a fitting. If you are not buying any other product from us, you will have to call for a shipping quote. If you are NOT in the lower 48, you must call for a quote. 920-838-4205
The SharkBite® Connection System from Cash Acme makes any plumbing project fast and easy. Whether you need to repair a broken pipe or plumb a whole house, SharkBite is the push-fit solution for leak-free results. The system includes hundreds of products – dozens of fittings, a wide range of push-fit valves, even PEX tubing. Tested, proven, certified – SharkBite is your connection for plumbing project success.
FEATURES AND BENEFITS
No tools, soldering, clamps, unions or glue required. Cut pipe square, de-burr to remove rough edges/ debris, mark the pipe for correct depth and push to get a pressure ready connection every time.
Disconnect in seconds by sliding the Shark Shifter De-Mount Tool down the pipe to engage the demount lugs and rotate clockwise to lock in the open position leaving both hands free, you can now remove the pipe.
SAFE-Recessed Release Collar:
SharkBite 2XL requires a special Demount Tool and cannot be accidentally disconnected/released.
Extensive Range Including Slip Feature on Couplings and Tee’s: When repairing or tapping into existing pipe with “Push- Fittings” you must be able to either move the fitting or the pipe to ensure the pipe is engaged fully into the fitting. With rigid pipe like copper the only way with “Push-Fittings” is to have a SLIP feature to allow easy installation when tapping into existing pipe.
Unlike other tool intensive connection methods there is NO need to send multiple fitters to a job, SharkBite 2XL has been designed to be installed or removed by one person. All fittings are lubricated for easy connection and by fitting the Shark Shifter De-Mount Tool before engaging the pipe the force required can be reduced further. With the De-Mount Tool locked on you also have hands free disconnection. WET OR DRY: No waiting for copper tube to dry before soldering or glue to cure, SharkBite makes an instant connection.
Unlike alternative tool intensive connection systems, SharkBite has no special tooling required for installation.
Fastest connection - CUT-PUSH-DONE. Easy access to small or tight spaces. No Flame - Does not require fire permit or fire marshal.
Should you make an error or simply want to change your installation, no problem for SharkBite. Simply remove and re-use. (Fittings used for repeated testing must not be used in any permanent application).
Fittings Cannot be Disassembled:
SharkBite 2XL Fittings are factory assembled and components cannot be removed.
Long Pipe Engagement:
Provides pipe support against lateral pipe forces.
Lead Free (LF) Dezincication Resistance (DZR) Brass:
Exceeds current no lead legislation - AB1953 or NSF372. Suitable for underground installation subject to local code authorites/inspectors. Dezincication properties (DZR) exceed ISO6509 and NSF-14.
Remove and re-use fittings, no need to be scrapped. No heat is required for installation.
PUSH 3/4 FPT
PUSH 1/2 MPT
PUSH 3/4 90 ELL
PUSH 3/4X1" COUPLER
1 1/4" Sharkbite Fitting Coupler SB0135
Sharkbyte FPT fitting 1"
PUSH BALL VALVE 1" NSF372 FULL
PUSH BALL VALVE 3/4 NSF372 SS
PUSH 1X1X3/4 TEE PUSH NSF372
Browse Similar Items
SharkBite Push Fittings